33 32 021 Replacing left or right trailing arm
WARNING: This page is about a different car, the 2018 BMW 340i, 2017 BMW 340i, and 2016 BMW 340i. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
- The trailing arm must be installed with the opening (U-section) facing downward!
Unscrew nuts (1).
Tightening torque 33 32 1AZ.
Move screw toward the rear.
Installation note:
Note direction of insertion of bolts.
Replace nut.
TIGHTEN DOWN SCREW CONNECTION IN NORMAL POSITION .
Slacken nut (2).
Tightening torque 33 32 2AZ.
Move screws toward the rear.
Remove trailing arm (3) downward.
Installation note:
The trailing arm must be installed with the opening (U-section) facing downward!
Note direction of insertion of screw.
Replace nut.