31 12 Axle guide and axle strut
WARNING: This page is about a different car, the 2018 BMW 340i, 2017 BMW 340i, and 2016 BMW 340i. However, it is still accessible from the selected car via links, so may be relevant.
3112 AXLE GUIDE AND AXLE STRUT - TIGHTENING TORQUES SPECIFICATION
| Type | Thread | Instructions | Torque Specification | |
|---|---|---|---|---|
| 1AZ Tension strut to front axle support | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | M12 | Replace screw. | |
| Tighten down in NORMAL POSITION . | ||||
| Jointing torque | 100 Nm | |||
| Angle of rotation | 90° | |||
| 2AZ Tension strut to swivel bearing | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | M14 | Replace nut. | 175 Nm |
| 3AZ Wishbone to front axle support | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | M12 | Replace screw and nut. | |
| Tighten down in NORMAL POSITION . | ||||
| Jointing torque | 100 Nm | |||
| Angle of rotation | 90° | |||
| 4AZ Wishbone to swivel bearing | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | M14 | Replace nut. | 175 Nm |