LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2018 >> 340i xDrive Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 227 (Front Axle - Tightening Torques (F30, 6-CYL RWD)) >> Output Shaft

Output Shaft

WARNING: This page is about a different car, the 2018 BMW 340i, 2017 BMW 340i, and 2016 BMW 340i. However, it is still accessible from the selected car via links, so may be relevant.
3160 OUTPUT SHAFT - TIGHTENING TORQUES SPECIFICATION

Output shaft to wheel bearing 
M16
Replace collar screw and compression spring.		 Joining torque 210 Nm
Angle of rotation 90°
scientia non olet · About LEMON Manuals