REP-TAT-P-3111-02 Tighten the bolts on the front axle support

WARNING: This page is about a different car, the 2018 BMW 340i, 2017 BMW 340i, and 2016 BMW 340i. However, it is still accessible from the selected car via links, so may be relevant.

Replace gaskets (1).
Parts : Seals

Courtesy of BMW OF NORTH AMERICA, INC.
Check threads (1) to (3) for damage. If necessary, repair with Helicoil thread inserts.
Tighten screws (1) to (3) hand-tight but do not tighten fully.

Tighten the screws (1).

TIGHTENING TORQUES SPECIFICATION

Front axle support to body
M12x45	120 Nm
M12x165	120 Nm
M14x60	120 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten down screws (2) and (3).

TIGHTENING TORQUES SPECIFICATION

Front axle support to body
M12x45	120 Nm
M12x165	120 Nm
M14x60	120 Nm