37 12 310 Replace the shock absorber (VDM) on the rear left or right w/ auxilary damper

WARNING: This page is about a different car, the 2018 BMW 330i xDrive and 2017 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

2 355 965
2 355 966

IMPORTANT:

When replacing the shock absorber, replace the auxiliary damper as well.
Read and comply with INFORMATION ON REPLACING SHOCK ABSORBERS .

Necessary preliminary tasks:

Remove the SHOCK ABSORBER

Courtesy of BMW OF NORTH AMERICA, INC.

Remove protective cap (1) and sealing washer (2).

Installation note:

Replace the faulty components.

Courtesy of BMW OF NORTH AMERICA, INC.

Release nut (1) with special tool 2 355 965 and 2 355 966.

Tightening torque, refer to: 33 52 2AZ .

Installation note:

Replace nut.

Impact screwdrivers are prohibited!

Risk of damage inside the shock absorber!

Courtesy of BMW OF NORTH AMERICA, INC.

Replace auxiliary damper with protective tube (1).