33 17 Rear axle final drive suspension
WARNING: This page is about a different car, the 2018 BMW 330i xDrive and 2017 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
33 17 REAR AXLE FINAL DRIVE SUSPENSION - TIGHTENING TORQUES SPECIFICATIONS
| Type | Thread | Instructions | Torque Specification | |
|---|---|---|---|---|
| 1AZ Rear differential to rear axle carrier, front | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | M12 | Follow the applicable REPAIR INSTRUCTIONS . | 100 Nm |
| 2AZ Rear differential to rear axle carrier, rear | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | M14 | Observe the applicable REPAIR INSTRUCTIONS
. Replace nut. |
165 Nm |
| 3AZ Vibration absorber to screw connection of rear axle differential, rear | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | M8 | 28 Nm | |
| 4AZ Vibration absorber to rear axle support, rear | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | M8 | 19 Nm | |
| 5AZ Vibration absorber to rear axle differential | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | M12 | Replace screw. | 100 Nm |
| 6AZ Vibration absorber to screw connection of rear axle differential, rear | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | M10x32 | Replace screw. Jointing torque Angle of rotation |
56 Nm 90° |
| 7AZ Vibration absorber to screw connection of rear axle differential, rear | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | Torx E14 M 10x32 | Replace screw. Jointing torque Angle of rotation |
56 Nm 90° |