00 00 Greasing positive battery connection point

WARNING: This page is about a different car, the 2018 BMW 330i xDrive and 2017 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove the FRONT ACOUSTIC COVER

Lift expanding rivets (1) out of cover (2) on right.

Remove cover (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

If necessary, replace damaged expanding rivets.

Make sure holders (3) are correctly seated.

Pull out protective cap (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Coat B+ terminal (1) with terminal grease.

NOTE: use a standard flat brush with a width of approx. 2.5 cm to apply the grease.

Sourcing reference: obtainable from BMW Parts Department.

Contact-protection grease KF1

BMW Part number: 83 19 2 295 229

Courtesy of BMW OF NORTH AMERICA, INC.

Coat B+ terminal (1) with terminal grease.

NOTE: use a standard flat brush with a width of approx. 2.5 cm to apply the grease.

Sourcing reference: obtainable from BMW Parts Department.

Contact-protection grease KF1

BMW Part number: 83 19 2 295 229

Courtesy of BMW OF NORTH AMERICA, INC.

Take out the relay holder (1) and set to one side.

Courtesy of BMW OF NORTH AMERICA, INC.

Pull out protective cap (1) in direction of arrow.

Courtesy of BMW OF NORTH AMERICA, INC.