00 00 624 Service - vehicle check
WARNING: This page is about a different car, the 2018 BMW 330i xDrive and 2017 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
- Service - vehicle check
Passenger compartment:
- Check HORN, HEADLIGHT FLASHERS AND HAZARD WARNING FLASHERS
- Check INSTRUMENT AND INSCRIPTION LIGHTING, PASSENGER COMPARTMENT AND GLOVEBOX LIGHTING, BLOWER
- Check LIGHTING SYSTEM : if necessary, charge separately to adjust the headlights, function of front/rear and vehicle number plate lighting
- Check SEAT BELTS : Condition of seat belt strap, check function of automatic reel, check seat belt locking reel, seat belt buckle, seat belt clip and, if necessary, seat belt clasp for damage
- Check WINDSCREEN WIPER AND WASHER SYSTEM FOR FUNCTION AND SETTING
- Convertible only:NOTE: Open the soft top prior to the triggering process!
Rear/tires:
- Check TIRES (incl. compact spare wheel if present):
- Tread depth
- Tread wear pattern
- External condition
- Check inflation pressure and correct if necessary.
Observe the information on tolerance compensation for RDC.
- If fitted:
BMW Mobility System: Check expiry date on sealant bottle. Replace sealant bottle if necessary (charge separately).
- Check that warning triangle, high-visibility jacket and first-aid kit are present. Check expiry date on first-aid kit (observe national legislation where applicable).
- INITIALIZE RUN FLAT INDICATOR (RPA) Run Flat Indicator or RDC RESETTING tire pressure control
Engine compartment:
- Check the left and right of the units compartment for water and leaves and bill separately for clean-up, if applicable.
- Check COOLANT LEVEL AND CONCENTRATION , top up where necessary (check both coolant levels on F01, F02, F10 and F30 hybrid cars). Inform customer in event of incorrect fluid level and, if necessary, troubleshoot (charged separately).
- Check WINDOW GLASS AND HEADLIGHT CLEANING SYSTEM : checking fluid level, topping up if necessary
- If fitted:
Steering fluid reservoir: Check oil level, top up if necessary. Inform customer in event of incorrect fluid level and, if necessary, troubleshoot (charged separately).
Underfloor:
- Check BRAKE LINES AND CONNECTIONS : for tightness, damage, mounting and correct position
- Check VEHICLE UNDERBODY including all visible components: Check for damage, correct position, tightness and corrosion
- Check STEERING COMPONENTS : Check for play, tightness is applicable, damage and wear
Test drive:
- CHECK FOR ROAD SAFETY :
- Brakes
- Steering
- Shock Absorbers
- Transmission
- Reset CBS DISPLAY according to factory specification
- For vehicles with electronic service history:
Record maintenance work in the electronic service history .