REP-TAT-P-2620 Install front propeller shaft
WARNING: This page is about a different car, the 2018 BMW 330i xDrive and 2017 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Driving is not permitted without a front prop shaft.
- Replace screws 1.
Parts: Bolts
TIGHTENING TORQUES SPECIFICATIONFront propeller shaft to transfer box/front differential M8 ZNS screw
Replace screws and nuts. Comply with jointing torque and angle of rotation!Jointing torque 20Nm Angle of rotation 45° - Install front propeller shaft.
- Tighten the screws 1.
- Replace screws 1.
Parts: Bolts
- Tighten the screws 1.
TIGHTENING TORQUES SPECIFICATION
| Front propeller shaft to transfer box/front differential |
|---|
| M8 ZNS screw Replace screws and nuts. Comply with jointing torque and angle of rotation! |
| Jointing torque |
| 20Nm |
| Angle of rotation |
| 45° |