11 61 Intake plenum
WARNING: This page is about a different car, the 2018 BMW 330i xDrive and 2017 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
11 61 INTAKE PLENUM - TIGHTENING TORQUES SPECIFICATIONS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Intake plenum to cylinder head | B46M0/O0/B48M0/O0 | M6 | 10 Nm | |
| 2AZ Holder for intake plenum to cylinder head/crankcase | B46M0/O0/B48M0/O0 | M6 | 10 Nm | |
| 3AZ Rear intake plenum holder | B46M0/O0/B48M0/O0 | M6 | 10 Nm | |
| 4AZ Intake plenum to rear/front holder | B46M0/O0/B48M0/O0 | 8 Nm | ||
| 5AZ Holder for wiring harness to intake plenum | B46M0/O0/B48M0/O0 | 5 Nm | ||
| 6AZ Tank vent line to intake plenum | B46M0/O0/B48M0/O0 | 5 Nm |