Section 213 (Engine - Tightening Torques (F30, 4-CYL AWD)): Engine: Notes
WARNING: This page is about a different car, the 2018 BMW 330i xDrive and 2017 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUES SPECIFICATIONS
| Standard screw connection 4 Nm | ||
| Oval-head screw | Tightening torque | 4 Nm |
| Standard screw connection hose clamp 5 | ||
| Hose clamp L12-L15 | Tightening torque | 1.25 Nm |
| Standard screw connection M10 | ||
| M10 | Tightening torque | 38 Nm |
| Standard screw connection M5 | ||
| M5 | Tightening torque | 5 Nm |
| Standard screw connection M6 | ||
| M6 | Tightening torque | 8 Nm |
| Standard screw connection M7 | ||
| M7 | Tightening torque | 13 Nm |
| Standard screw connection M8 | ||
| M8 | Tightening torque | 19 Nm |