22 31 050 Replacing cross member for transmission mounting

WARNING: This page is about a different car, the 2018 BMW 330i xDrive and 2017 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove the REAR UNDERBODY PROTECTION.
Support transmission with lifter.

Removal:

Courtesy of BMW OF NORTH AMERICA, INC.

Loosen screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Loosen screw (1).

Remove transmission cross-member (2).

Installation:

Install transmission cross member (2).

Insert screw (1) and tighten.

Courtesy of BMW OF NORTH AMERICA, INC.

Tightening torque, refer to: 22 32 6AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Insert screws (1) and tighten.

Tightening torque, refer to: 22 32 3AZ .

Required follow-up work:

Install the REAR UNDERBODY PROTECTION.