REP-TAT-P-3221-01-F30 Removing the track rod end
WARNING: This page is about a different car, the 2018 BMW 330i xDrive and 2017 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Component damage caused by striking tools .
Brute force can result in component damage .
- Only use those tools intended for the work.
Description is for left component only. Procedure on the right side is identical.
- Loosen the nut 1 , if necessary, counter-hold the Torx socket.
- Remove the track rod end 2 from the swivel bearing.