LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2018 >> 340i xDrive Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 205 (Front Axle - Tightening Torques (F30, 4-CYL AWD)) >> Wishbone And Strut With Rubber Mount >> Notes

Wishbone And Strut With Rubber Mount: Notes

WARNING: This page is about a different car, the 2018 BMW 330i xDrive and 2017 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUES SPECIFICATIONS

Wishbone to front axle support 
M12 Jointing torque  100 Nm
Replace screw and nut.
Tighten nut in NORMAL POSITION .		 Angle of rotation  90°
scientia non olet · About LEMON Manuals