31 60 Output shaft
WARNING: This page is about a different car, the 2018 BMW 330i xDrive and 2017 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
31 60 OUTPUT SHAFT - TIGHTENING TORQUES SPECIFICATIONS
| Type | Thread | Instructions | Torque Specification | |||
|---|---|---|---|---|---|---|
| 1AZ Output shaft console to engine oil sump | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | M8 | 19 Nm | |||
| 2AZ Output shaft to wheel hub | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | M16 | Observe the applicable repair instructions. Replace collar bolt and spring. |
|||
| Jointing torque Angle of rotation |
210 Nm 90° |
|||||