33 55 041 Replacing anti-roll bar link for anti-roll bar, bar on left or right
WARNING: This page is about a different car, the 2018 BMW 330i xDrive and 2017 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove REAR WHEEL.
Release nuts (1); if necessary, grip at inner Torx socket.
Tightening torque, refer to: 33 55 2AZ .
Remove anti-roll bar link (2).
Installation note:
Replace self-locking nuts.