13 62 Sensors for control unit
WARNING: This page is about a different car, the 2018 BMW 330i xDrive and 2017 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
13 62 SENSORS FOR CONTROL UNIT - TIGHTENING TORQUES SPECIFICATIONS
| Type | Thread | Torque Specification | |
|---|---|---|---|
| 1AZ Camshaft sensor to cylinder head cover | B48 engine | TS5x20 | 4 Nm |
| 2AZ Crankshaft sensor to crankcase | B48 engine | M6 | 4.5 Nm |
| 3AZ Charging pressure sensor to charge air line | B48 engine | TS5x20 | 4 Nm |
| 4AZ Temperature sensor to charge air line | B48 engine | 2 Nm | |
| 5AZ Knock sensor to crankcase | B48 engine | M8x30 | 21.5 Nm |
| 6AZ Charging pressure sensor on intake plenum | B48 engine | TS5x20 | 4 Nm |
| 7AZ Hot film air mass meter on intake silencer | B48 engine | TS4x16 | 1.5 Nm |
| 8AZ Component temperature sensor on cylinder head, front | B48 engine | 2 Nm | |
| 9AZ Coolant temperature sensor to crankcase | B48 engine | 13.5 Nm | |
| 10AZ Differential pressure sensor to holder | 8 Nm |