LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2018 >> 340i xDrive Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 198 (Propeller Shaft - Tightening Torques (F30, 4-CYL AWD)) >> Prop Shaft, Front

Prop Shaft, Front

WARNING: This page is about a different car, the 2018 BMW 330i xDrive and 2017 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUES SPECIFICATIONS

Front propeller shaft to transfer box/front differential 
M8 ZNS screw Jointing torque 20 Nm
Replace screws and nuts. Comply with jointing torque and angle of rotation! Angle of rotation 45°
scientia non olet · About LEMON Manuals