9.0 NG6 Front And Rear Radial Seal Sealant
WARNING: This page does not describe the selected car, but rather 180 other vehicles, including the 2014 BMW i8, 2014 BMW i3, 2014 BMW Z4, 2014 BMW X6 M, and 2014 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
When replacing the front or rear radial crankshaft seals on new generation 6 cylinder engines, use of a special Loctite® sealant is recommended to fill the seal grooves at the bedplate seam. Follow the appropriate repair instruction:
RA 11 14 005 - Front radial crankshaft seal replacement
RA 11 14 151 - Replacing crankshaft radial seal (rear)
Required Materials:
P/N 83 19 7 536 051 - Loctite® 128357 sealant compound\
P/N 83 19 7 515 683 - Loctite® 171000 primer
P/N 83 19 7 515 684 - Stamp