2016 Model Year and Newer - from bulletin SI B11 01 15 (10/2015)

WARNING: This page does not describe the selected car, but rather 180 other vehicles, including the 2014 BMW i8, 2014 BMW i3, 2014 BMW Z4, 2014 BMW X6 M, and 2014 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

As of approximately 7/2015 production, gasoline-engine-equipped vehicles have a new engine oil viscosity label (located on underside of engine compartment lid) recommending 0W-20, 0W-30 or 0W-40 engine oils. Further information on these oils will become available at a later time.

The 0W-20, 0W-30 and 0W-40 engine oils are fully interchangeable and compatible with the currently available 5W-30 engine oils (BMW High Performance Synthetic Oil SAE 5W-30).

When topping-up the engine oil, performing engine repairs and performing engine oil services, use the currently available BMW High Performance Synthetic Oil SAE 5W-30 until further information becomes available.

Refer to the most recent BMW service bulletins for any updates as they become available.