REP-TAT-P-5175-02 Installing the sound insulation on the bulkhead upper part center

• Check the seal on the bottom of the sound insulation (2) for damage, replace if necessary.
• Position the sound insulation (2).
• Tighten the screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.

• Clip in the sealing (2) in the direction of arrow.
• Fasten expanding rivet (1).
• Secure positive battery cable at the sealing (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Install the TRAILING LINK ON SPRING STRUT DOME 
• Install the COVER IN ENGINE COMPARTMENT ON LEFT OR RIGHT 
• Install the COVER IN ENGINE COMPARTMENT ON LEFT OR RIGHT