LEMON Manuals
: Even more car manuals for everyone
Home
>>
BMW
>>
2018
>>
340i Standard Trans
>>
Repair and Diagnosis
>>
Engine Mechanical
>>
Blowers, Superchargers & Turbochargers
>>
Engine Repair (F30, 6-CYL RWD) (4 Of 4)
>>
11 41 Oil Pumps With Strainer And Drive
>>
11 41 115 Removing and installing/replacing hydraulic valve for oil-pressure control (for oil pressure control) (Vehicles with manual transmission)
>>
REP-TAT-P-1141-01 Removing the hydraulic valve for the oil pressure control
REP-TAT-P-1141-01 Removing the hydraulic valve for the oil pressure control
Loosen the transmission bolt (1).
Courtesy of BMW OF NORTH AMERICA, INC.
Unlock and disconnect connector (1).
Courtesy of BMW OF NORTH AMERICA, INC.
Loosen screw (1).
Remove the hydraulic valve (2).
Courtesy of BMW OF NORTH AMERICA, INC.
Courtesy of BMW OF NORTH AMERICA, INC.