REP-TAT-P-1354-01 Removing the throttle body
NOTE:
RISK OF DAMAGE
Electrostatic discharge.
Damage to or destruction of electrical components.
Electrostatic discharge.
Damage to or destruction of electrical components.
- Leave electrical components in original packaging until just before they are installed. Use the original packaging only for any return shipments. Always package removed components straight away.
- Read and comply with user information on using the associated special tool 12 7 060.
- Only tap the housings of electrical components. Do not tap pins or multi-pin connectors directly.
- Wear electrically conductive clothing and antistatic shoes (with ESD symbol).
- For additional information see: NOTES ON ESD PROTECTION (ELECTROSTATIC DISCHARGE)
- Unlock and loosen connector (1).
- Unlock and loosen connector (2).
- Unlock and loosen connector (3).
- Loosen screws (4).
- Feed out charge air line (5) and place to one side.
- Remove screws (arrows).
- Loosen the throttle bodies (1).
- Unlock and loosen connector (1).
- Remove the throttle bodies (2).