Replace the shock absorber (VDM) on the rear left or right
Special tools required:
- 2 355 965
- 2 355 966
IMPORTANT:
- When replacing the shock absorber, replace the auxiliary damper as well.
- Read and comply with INFORMATION ON REPLACING SHOCK ABSORBERS .
Necessary preliminary tasks:
Remove SHOCK ABSORBER .
Remove protective cap (1) and sealing washer (2).
Installation note:
Replace the faulty components.
Release nut (1) with special tool 2 355 965 and 2 355 966.
Tightening torque 33 52 2AZ .
Installation note:
Replace nut.
Impact screwdrivers are prohibited!
Risk of damage inside the shock absorber!
Replace auxiliary damper with protective tube (1).