Remove all roller cam followers
Prerequisite
- Cylinder head removed
Preliminary work
- Refer to REMOVING INTAKE CAMSHAFT .
- Refer to REMOVING EXHAUST CAMSHAFT .
- Detach and remove the roller cam followers (1) on the intake side from hydraulic valve clearance compensating elements (arrows).
- Place all the roller cam followers (1)
in order in the special tool 0 495 105 (11 4 480)
.
- Detach and remove the roller cam followers (1) on the exhaust side from hydraulic valve clearance compensating elements (arrows).
- Place all the roller cam followers (1) in order in the special tool 0 495 105 (11 4 480) .