Connect the coolant line to the low-temperature cooling system

NOTE: TECHNICAL INFORMATION
Make sure that the connections are locked correctly. The locks must engage audibly.

Connect and lock coolant line (1).
The coolant line (1) must audibly engage.

Courtesy of BMW OF NORTH AMERICA, INC.
Connect and lock coolant line (1).
Connect and lock coolant line (2).

All coolant lines must audibly engage.

G14545449

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to FILLING THE LOW-TEMPERATURE COOLANT CIRCUIT WITH THE VACUUM FILLER DEVICE .
Refer to ACTIVATING HIGH-VOLTAGE SYSTEM .
Refer to INSTALLING THE FLAP IN THE RIGHT LUGGAGE COMPARTMENT TRIM PANEL .
Refer to BLEEDING THE LOW-TEMPERATURE COOLING SYSTEM .
Refer to CHECKING LOW-TEMPERATURE COOLING SYSTEM FOR WATERTIGHTNESS .
Refer to INSTALLING THE UNDERBODY PANELLING ON THE SIDES .
Refer to INSTALLING THE FRONT UNDERBODY PROTECTION .