Removing and installing/replacing door stop on left or right rear door

Necessary preliminary tasks: 

• Close door windows
• Remove SOUND INSULATION  in front section

After disengaging door stop, use suitable means of preventing door from opening past its maximum permissible opening angle (risk of damaging paintwork or bodywork).

Pull out rubber cover (1).

Release screw (3).

Tightening torque 51 22 5AZ .

Release screw (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Tightening torque 51 22 3AZ .

Slide out door stop.

Installation note: 

Seal (1) must not be damaged.

Remove door stop (1) via aperture (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Following parts of door retainer (3) must not be damaged:

1. Hinge
2. Thread

Courtesy of BMW OF NORTH AMERICA, INC.