Replacing rear reflector (from 05/2013)

Necessary preliminary work:

REMOVING REAR BUMPER PANEL .

NOTE: In vehicles produced from 05/2013, the rear reflector can no longer be removed without destroying it.

Release the latch mechanism (1) on the rear reflector (2), and remove from the bumper panel (3) in the direction of the arrow.

Installation note:

Make sure replacement rear reflector (2) is correctly fitted in bumper panel (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Latch mechanisms (1) and guides (2) on replacement rear reflector (3) must not be damaged or missing.

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: In the following national-market versions, component (1) on the back of the bumper panel must be removed before the replacement rear reflector can be installed:

India
China
Korea
Gulf States

Component (1) is bonded.

Courtesy of BMW OF NORTH AMERICA, INC.