Install the camshaft position sensor of the exhaust camshaft
- Check the sealing ring (1) for damage, replace it if necessary.
- Install the camshaft position sensor (3).
- Tighten down screw (2).
TIGHTENING TORQUE SPECIFICATIONS
| Camshaft position sensor for exhaust camshaft on cylinder head cover | ||
|---|---|---|
| TS5x20 | tightening torque | 4 Nm |
- Connect connectors (1) and lock.
The connector (1) must engage audibly.
Follow-up work
- Refer to INSTALLING ACOUSTIC COVER .