Removing and installing/replacing outer door handle on left or right rear door

Necessary preliminary tasks:

If necessary, lay outer door handle light (1) slightly to one side.

Pull out outer door handle (2) and feed out in direction of arrow.

Version with Comfort Access/CA:

Carefully feed out outer door handle (2) and disconnect associated plug connection.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Locator (1) must not be damaged.

Version with Comfort Access/CA:

Seal (2) must not be damaged.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Seals (1 and 2) must not be damaged.

In necessary, use string to pull lock actuation (3) outwards and hold in position.

Install outer door handle and insert correctly into lock actuator (3).

Remove string.

Mount COVER ON OUTER DOOR HANDLE and carry out function check with open door.

Courtesy of BMW OF NORTH AMERICA, INC.

After replacing version with Comfort Access/CA:

Clear fault memory and perform functional check.