51 41... Removing and installing/replacing switch cover on left or right front door trim panel

WARNING: This page does not describe the selected car, but rather 41 other vehicles, including the 2018 BMW 320i xDrive, 2018 BMW 320i, 2017 BMW 320i xDrive, 2017 BMW 320i, and 2016 BMW ActiveHybrid 3. However, it is still accessible from the selected car via links, so may be relevant.

When working on trim panel components, make sure that visible surfaces are not scratched or damaged (e.g. by sharp-edged tools).

Necessary preliminary tasks:

Remove COVER ON DOOR HANDLE

Use a suitable tool (1) to release latch mechanism (2) of switch cover (3) in direction of arrow.

Unclip switch cover (3) from door trim panel towards front/top.

Disconnect plug connection and remove switch cover (3).

Fig 1: Removing Door Trim Panel Switch Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Following parts must not be missing or damaged:

Catch
Retaining clips
Guides

Replacement:

Remount SWITCH FOR POWER WINDOW (4) .

Fig 2: Identifying Front Door Trim Panel Catch And Guide

Courtesy of BMW OF NORTH AMERICA, INC.