62 30 010 Removing and installing/renewing head-up display

IMPORTANT: Read and comply with notes on protection against electrostatic discharge (ESD PROTECTION) .

IMPORTANT: Comply with notes and notes on HANDLING OPTICAL FIBRES .
Risk of damage!
Do not scratch lens of head-up display.

Necessary preliminary tasks:

NOTE: Similar to graphic.

Remove seal (1) from head-up display (2).

Release screws (3).

Tightening torque 62 30 1AZ .

Carefully feed out head-up display (2) in upward direction.

Fig 1: Identifying Seal And Head-Up Display

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock plug connection (1) on underside of head-up display (2) and disconnect.

Remove head-up display (2).

Installation note:

Clean lens of head-up display.

Fig 2: Identifying Plug Connection And Head-Up Display

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

NOTE: When replacing head-up display on vehicles with production date up to 07/2013 the instrument cluster must be flash programmed .