62 30 005 Removing and installing/replacing trim for Head-Up Display

Special tools required:

When working on trim panel components, make sure that visible surfaces are not scratched or damaged (e.g. by sharp-edged tools).

Release cover for head-up display (1) with special tool 00 9 325 at marked area from retaining clips.

Feed cover for head-up display (1) in direction of arrow out of instrument panel trim and remove.

Fig 1: Releasing Head-Up Display Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Retaining clips (1) must not be missing or damaged.

Make sure cover for head-up display (2) is correctly seated on instrument panel trim.

Fig 2: Identifying Retaining Clips And Head-Up Display Cover

Courtesy of BMW OF NORTH AMERICA, INC.