12 31 020 Removing and installing or replacing alternator (N20, N26)

Necessary preliminary tasks:

Release screws (1).

Tightening torque: 12 31 1AZ .

Fig 1: Identifying Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock connector (1) and remove.

Release nut (2) and remove the positive battery cable.

Tightening torque: 12 42 1AZ .

Disconnect tank ventilation line (3) and place to one side.

Feed out alternator (4) to the left and remove.

Fig 2: Identifying Connector, Nut, Ventilation Line And Alternator

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.