Installing the sound insulation on the firewall upper part center

Check the seal on the bottom of the sound insulation (2) for damage, replace if necessary.
Position the sound insulation (2).
Tighten the screws (1).
TIGHTENING TORQUE SPECIFICATIONS

Sound insulation to firewall upper part

Screw 8.0 Nm

Courtesy of BMW OF NORTH AMERICA, INC.
Clip in the sealing (2) in the direction of arrow.
Fasten expanding rivet (1).
Secure positive battery cable at the sealing (2).

Courtesy of BMW OF NORTH AMERICA, INC.