51 71 120 Removing and installing/replacing front cowl panel seal (2' Series convertible models)
CAUTION:
Risk of damage!
When working on trim panel components, make sure that the sensitive surfaces are not scratched or damaged.
When working on trim panel components, make sure that the sensitive surfaces are not scratched or damaged.
Necessary preliminary work:
- If necessary, open soft top
- Refer to REMOVING FRONT (INNER) DOOR SILL COVER STRIP .
- Refer to REMOVING TRIM STRIP ON GUTTER STRIP .
- Refer to REMOVING TRIM FOR FRONT HEADLINER .
Removal:
Carefully feed out and remove cowl panel sealing (1).
Installation:
Correctly position and install cowl panel sealing (1).
Ensure that it fits correctly on all the adjacent parts.
Required follow-up work:
- Refer to INSTALLING TRIM FOR FRONT HEADLINER .
- Refer to INSTALLING TRIM STRIP ON GUTTER STRIP .
- Refer to INSTALLING FRONT (INNER) DOOR SILL COVER STRIP .