Installing headlight repair kit (2' Series coupe models)

Necessary preliminary work: 

• Remove headlight. Refer to REMOVING AND INSTALLING (REPLACING) THE RIGHT HEADLIGHT (XENON)  .

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement of headlight is not required! 

Mount the holder from repair kit (I) with clamp (2) as shown. Tighten screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Remove holders (II, III, IV) as shown in left-hand image.

Mount holders from repair kit with retaining clips as shown in right-hand image and screw into place.

After installation: 

• ADJUSTING HEADLIGHTS .