51 61 026 Removing and installing/replacing both bottom reinforcement struts
Necessary preliminary tasks:
- Removing front/rear underbody protection. Refer to REMOVING AND INSTALLING/REPLACING UNDERBODY PROTECTION (FRONT) .
Release screws (1).
Tightening torque 51 61 19AZ .
Unfasten screws (2).
Tightening torque 51 61 6AZ .
Parts: Replace bolts (1 and 2).
Release screw (1).
Tightening torque 51 61 7AZ .
Unfasten screws (2).
Press wheel arch panel (3) to one side slightly.
Release screw (4) and thread reinforcement strut (5) out.
Tightening torque 51 61 20AZ .
Parts: Replace screws (1 and 4).
NOTE:
Carry out work on the right side in the same way as for the left side illustrated here.