66 33 010 Removing and installing/replacing ultrasonic sensors for Parking Maneuvering Assistant (2' Series coupe and convertible, 2017-2021)

Necessary preliminary tasks: 

• Refer to PARTIALLY REMOVING WHEEL ARCH COVER, FRONT LEFT OR RIGHT .

Unfasten plug connection (2) and disconnect.

Unlock latch mechanisms where marked and pull ultrasonic sensor (1) out of bracket (3).

Installation note: 

Latch mechanisms must not be damaged or missing.

Make sure ultrasonic sensor is seated securely!

Courtesy of BMW OF NORTH AMERICA, INC.