51 45 Trim, instrument trim panel
TIGHTENING TORQUE SPECIFICATION - TRIM AND INSTRUMENT TRIM PANEL
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Basic carrier for dashboard to bulkhead | I01 | 21.4 Nm | ||
| I12 | Replace screws | 21 Nm | ||
| 2AZ Basic carrier for dashboard to A-pillar | I01 | 21.4 Nm | ||
| I12 | 21 Nm | |||
| 3AZ Basic carrier for dashboard to tunnel | I01 | 21.4 Nm | ||
| I12 | 19 Nm | |||
| 4AZ Support, CID to basic carrier, | I01 | 2.7 Nm | ||
| 5AZ Support, left/right to basic carrier, | I01 | 1.8 Nm | ||
| 6AZ Dashboard to basic carrier, | I01 | 1.8 Nm | ||
| I01 | Metric | 6.8 Nm | ||
| I12 | 2.4 Nm | |||
| 7AZ Support to heating and air-conditioning unit | I12 | 4 Nm | ||
| 8AZ Support, lower to bulkhead | I12 | Replace screws | 7 Nm | |
| 9AZ Storage net to instrument panel trim | I01 | 1.5 Nm |