51 33 Power windows, front
TIGHTENING TORQUE SPECIFICATION - FRONT POWER WINDOWS
| Type | Thread | Tightening specifications | Value | |
|---|---|---|---|---|
| 1AZ Flat motor to power window regulator | I01 | 5 Nm | ||
| I12 | 4.5 Nm | |||
| 2AZ Window regulator to door | I01 | 9.5 Nm | ||
| I12 | Nut | 7.6 Nm | ||
| I12 | M6x16 | 8 Nm | ||
| 3AZ Door window glass to power window regulator | I01 | Multipoint screw With special tool 51 3 240 and torque wrench (long lever arm) |
12 Nm 9 Nm |
|
| 4AZ Fixed window glass to door | I01 | Replace nut | 8 Nm | |
| I12 | Replace nut | 7.6 Nm | ||
| 5AZ Trim of B-pillar/window frame to door | I12 | 2.5 Nm |