61 33 050 Removing and installing/replacing right fanfare horn

Necessary preliminary tasks:

Release FRONT WHEEL ARCH COVER at front area

Unfasten plug connection (1) and disconnect.

Release screw (2).

Remove fanfare horn (3).

Installation note:

Insert guide pin on holder into corresponding bore hole on support for bumper panel.

Fig 1: Identifying Fanfare Horn, Plug Connection And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Electromechanical fanfare is installed as standard.
The electronic fanfare is only installed in China, India, Russia, South Africa and Gulf states as of 01/2011.

Fig 2: Identifying Electromechanical And Electronic Fanfare

Courtesy of BMW OF NORTH AMERICA, INC.

A: Electromechanical fanfare
B: Electronic fanfare

Distinguishing features:

Electromechanical fanfare has a black connector (1)
Electronic fanfare has a white connector (3)
Only the electromechanical fanfare has no adjusting screw (2)
Holder (4) is vehicle-specific and may deviate from the graphic.