3341 Wheel Bearings
3341 WHEEL BEARINGS - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Output shaft on drive flange hub | F15/F16/F85/F86 | M27 | Replace collar nut. | 420 Nm |
| 2AZ Wheel bearing to wheel carrier | F15/F16/F85/F86 | M12 | Replace screws. Joining torque and angle of rotation must be observed without fail. Joining torque Angle of rotation |
100 Nm 45° |