13 71 190 Removing left clean air pipe (N63) (X6 xDrive 50i)

Necessary preliminary taste: 

• Remove left CHARGE AIR HOSE .

Removal: 

Release screw (1).

Unlock and pull off engine vent line.

Disconnect clean air pipe (2) from exhaust turbocharger and remove.

Courtesy of BMW OF NORTH AMERICA, INC.

Preparation for installation: 

Replace the damaged clean air pipe (1).

Part:  Clean air pipe

Courtesy of BMW OF NORTH AMERICA, INC.

Replace clean air pipe (1) with missing  collar support sleeve (2).

Part:  Clean air pipe

Courtesy of BMW OF NORTH AMERICA, INC.

Install undamaged clean air pipe (2) with fitted collar support sleeve (1) again.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Replace sealing ring on exhaust turbocharger.

Part:  Sealing ring

Thread in and install clean air pipe (2) on exhaust turbocharger.

Tighten screw (1).

Tightening torque 13 71 1AZ .

Connect engine ventilation line and lock.

The engine ventilation line must engage audibly.

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: 

• Remove left CHARGE AIR HOSE .