1113 OIL PAN (X6 sDrive 35i, X6 xDrive 35i)
1113 OIL SUMP - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Oil drain plug to oil sump | N55 | M12x1.5 | Replace sealing ring. | 25 Nm |
| 2AZ Oil sump (aluminum) to crankcase lower half. | N55 | M8x26 | Replace screw. Thread repairs exclusively with aluminum Helicoil threaded insert. Joining torque and angle of rotation must be observed without fail. Joining torque Angle of rotation |
8 Nm 90° |
| 3AZ Oil sump (aluminum) to crankcase lower half. | N55 | M8x92 M8x112 | Replace screw. Thread repairs exclusively with aluminum Helicoil threaded insert. Joining torque and angle of rotation must be observed without fail. Joining torque Angle of rotation |
8 Nm 180° |
| 4AZ Oil sump (aluminum) to crankcase lower half (AWD) | N55 | M8x36 | Replace screw. Thread repairs exclusively with aluminum Helicoil threaded insert. Joining torque and angle of rotation must be observed without fail. Joining torque Angle of rotation |
8 Nm 90° |
| 5AZ Oil deflector to crankcase lower half. | N55 | M6x20 | Replace screw. Thread repairs exclusively with aluminum Helicoil threaded insert. Joining torque and angle of rotation must be observed without fail. Joining torque Angle of rotation |
4 Nm 90° |
| 6AZ Transmission to oil sump. | N55 | M8x50 8.8 | 19 Nm | |
| 7AZ Oil level sensor to oil sump. | N55 | M6 | 8 Nm |
1113 TIGHTENING TORQUE OVERVIEW
| Oil sump to crankcase | ||
| M8x50 Replace screws. |
Joining torque | 8 Nm |
| Angle of rotation | 90° | |