1710 EXPANSION TANK (X6 xDrive 50i)
1710 COOLANT - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Expansion tank to body | N63 B40 O 1/N63 B44 O 1/S63 B44 T 2 | M6 | 10 Nm | |
| 2AZ Expansion tank for charge air cooler to holder | N63 B40 O 1/N63 B44 O 1/S63 B44 T 2 | M6 | 8 Nm | |
| 3AZ Holder for expansion tank for charge air cooler | N63 B40 O 1/N63 B44 O 1/S63 B44 T 2 | M6x20 | 10 Nm | |
| M6x16 | 8 Nm | |||
| 4AZ Transverse reinforcement to body | N63 B40 O 1/N63 B44 O 1/S63 B44 T 2 | M8 | Replace screws. Joining torque |
10 Nm |
| Angle of rotation | 90° | |||
| 5AZ Module carrier cover to module carrier | N63 B40 O 1/N63 B44 O 1/S63 B44 T 2 | 5 Nm |