1137 VALVETRONIC (X6 sDrive 35i, X6 xDrive 35i)
1137 VARIABLE VALVE GEAR - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Slide block to cylinder head. | N55 | M6x23 | 10 Nm | |
| 2AZ Torsion spring (throttle return spring) to cylinder head. | N55 | M6x20 | 10 Nm | |
| 3AZ Electrical servomotor to cylinder head. | N55 | M6x16 | 10 Nm | |
| 4AZ Oil spray nozzle to guide block. | N55 | M6x30 | 10 Nm | |
| 5AZ Stop screw of eccentric shaft to cylinder head. | N55 | M6 | 10 Nm | |
| 6AZ Valvetronic sensor to holder. | N55 | M6x20 | 8 Nm | |
| 7AZ Holder for valvetronic sensor. | N55 | M6x20 | 8 Nm |
1137 TIGHTENING TORQUE OVERVIEW
| Bearing cap to cylinder head | |
| M6x27 | 8.5 Nm |