1136 VARIABLE CAMSHAFT TIMING CONTROL (X6 xDrive 50i)
1136 VARIABLE CAMSHAFT CONTROL - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ VANOS gear to inlet and outlet camshafts (contact surface on screw head must be greased with ASSEMBLY PASTE 4.4 ) | N63O1 | M10x1 | Replace screw. Joining torque Angle of rotation |
30 Nm 90° |
| 2AZ Non-return valve VANOS to cylinder head | N63O1 | M14 x 1.5 | 20 Nm | |
| 3AZ Solenoid valve holder to cylinder head | N63O1 | M6 | 10 Nm |