1131 CAMSHAFT (X6 sDrive 35i, X6 xDrive 35i)
1131 CAMSHAFT - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Upper and lower bearing strip of camshaft (steel screw 10.9) | N55 | M7x70 | Insert screws dry Joining torque Angle of rotation |
8 Nm 60° |
| 2AZ Eccentric shaft bearing cap to cylinder head | N55 | M6x27 | 8.5 Nm | |
| 3AZ Camshaft bearing cap to cylinder head | N55 | M6x30.5 | 8.5 Nm | |
| 4AZ Chain drive module to cylinder head | N55 | M6x35 | 8 Nm | |
| 5AZ Guide rail to crankcase | N55 | M8 | 20 Nm | |
| 6AZ Guide rail to cylinder head | N55 | M7 | 14 Nm | |
| 7AZ Chain tensioner to cylinder head | N55 | M22 x 1.5 | Do not retighten the chain tensioner. Replace sealing ring, thread lightly oiled |
55 Nm |
| 8AZ Screw plug in cylinder head | N55 | M18x1.5 | 25 Nm |
1131 TIGHTENING TORQUE OVERVIEW
| Preload timing chain | ||
| tightening torque | 0.6 Nm | |