1121 CRANKSHAFT WITH BEARING (X6 xDrive 50i)

1121 CRANKSHAFT AND BEARINGS - TIGHTENING TORQUE SPECIFICATION

	Type	Thread	Tightening specification	Measure
1AZ Increment wheel on crankshaft	S54	M5 10.9	Replace screws Joining torque Torque angle	5.0 Nm 45°
1AZ Increment wheel on crankshaft	S54	M5 10.9	Replace screws Joining torque Torque angle	5.0 Nm 45°
Increment wheel on crankshaft		M5 10.9	Replace screws	13 Nm
Increment wheel on crankshaft		M5 8.8	Replace screws	5.5 Nm